How To Install Cement Board In Bathroom

HowTo Install Cement Board In Bathroom - If you want to install cement board you need to know How To Install Cement Board In Bathroom. Plastering cement floors usually use rectangular shape by using species / mortar. Measuresin stucco cement floor are performed by How To Install Cement Board In Bathroom:

·         Determine the location of the highest point of the floor face basis, which usually taken under the door.

·         The first installation was at the bottom of the door with using mortar.

·         From the face of the first couple of threads drawn towards corners last room on each corner mounted one floor as a guide for couples face higher floors.

·         From the corner of the floor is couples drawn parallel threads edge of the room to determine the location of the points between or midst room.

·         In places they are installed stakes. At stake nailed board to pull-threads, such as the installation of the board building. Mounting boards must be flat and examined with carpenter tools.

·         Of these boards to pull yarn stretched threads installation. At first floor of the pair pulled thread near the door first, then in the direction perpendicular also stretched yarn to pull towards cross-thread other.

·         From the pull of the yarn begins installation plastering the floor.

·         Plastering floor performed with ± 2 cm thickness, surface stucco trim while rubbed with abrasive wood.

·         Installation is done by backward moving towards the door plaster floors that have been installed are not disturbed by the installation of stucco next floor. To keep the installation of tiles that have been completed are not damaged, in certain places to put the board in the street upon it. After a bit dry, the surface is coated with a mixture of cement floor applied pure water using wood or steel plank and flattened.

When you want stucco surface flooring like tile, before the plaster hardens the withdrawal cord  or rope attached to the surface of the plaster floor. Pole between can be adjusted according to needs.

Various debris, dust, sand and dirt will inhibit the adhesion of floor tile so it is important to clean the surface before being installed ceramic floors above. The first step is to clean the floor as clean as possible. After the first step of How To Install Cement Board In Bathroom is completed, then we measure and try to put some tiles on the floor, keep the left and right side of the edge of the floor has the same size so that the rest is easy to make the edge of the ceramic pieces because the same size and this was to beautify the floor to make it more presentable.

In the next step of How To Install Cement Board In Bathroom the mix of cement and sand that has been finely sifted, comparison is 1 : 4. Add enough water. Flatten the surface of the bathroom floor and toilet with a mix that was created in step 3. Note the thickness of the surface of the mixture must equal at least 1.5 cm to 2 cm. Do not be too thin so that ceramics can be strong glue on the surface of the floor.